Cans are still the »classic» drinks packaging choice in the food and beverage industry. After forming, one of the next high-speed production processes the cans undergo is painting. Specially-developed roller chains have become the preferred conveying technology for this rapid transfer, during which the cans are held in place by protective heads connected to the chain by special transport pins.
The pin oven chains (POC) developed by iwis offer a number of unique advantages. The precision roller chains themselves are particularly wear-resistant and they are treated with the iwis special lubricant IPP before they leave the factory. IPP is PWIS-free, non-drip, suitable for high temperatures and approved for use in the food industry.
Transport pins can be replaced easily without breaking the chain or removing it from the machine. Three different fixture possibilities are available – pins are integrated in the outer chain plates, secured with special nuts or fixed with split-pins. Users can also choose between two pin versions: flexible or snap-off. The flexible pin – for example after an accidental impact caused by a conveyor jam – can be quickly and easily bent back to its originally position by hand. The advantage of the snap-off pin is that it will break off in the event of a shock or accidental contact with an obstacle during operation. The snap-of solution is possible because both transport pins and chain pins have the hardness and thus the same wear resistance. This can be of importance when producing steel cans with a risk of jamming the production machines, when the pins do not break. The length of the transport pins can also be adapted to the requirements of individual specifications.
Finally, the standard protective head is made from high-quality PEEK which is heatproof up to at least 260 °C and is resistant to a variety of chemicals. A high-temperature elastomer head (ECT) developed and pa-tented by iwis is also available as an alternative. With its design, it can be replaced easily without the need for complex tools and it is robust in everyday operation because its damping properties are similar to those of a spring. It is made from PWIS-free material that is approved for use in contact with food.
Well-equipped in every respect: a comprehensive range of spare parts and user-friendly tools for assembling and dismantling chains round off the iwis pin oven chain programme.
iwis is always able to offer can manufacturers a high-quality conveyor chain solution that is tailormade for their individual application requirements. The hallmark of quality: all production series use JWIS brand precision roller chains, so long service life and reliable aftersales service are guaranteed.
In addition to pin oven chains, Munich-based chain specialist iwis provides a full product range for all drive and conveying applications. This also includes precision and high-performance roller chains, conveyor chains, maintenance-free and corrosion-resistant chains, power and free conveyor chains, special-purpose conveyor chains, flyer chains, flat-top chains, modular belts, chains and accessories for agricultural machinery, and timing drives for the automotive industry.
Tsubaki chain wear indicators now available in large sizes
Tsubaki, the leading manufacturer of high quality industrial train and power transmission components, has expanded its line-up of chain wear indicators with the addition of larger sizes.
The new BS Large Size Indicator is available in sizes RS20B to RS48B and the ANSI Large Size Indicator – covers sizes from RS100 to RS240. These complement the existing BS Set which is used with sizes RF06B to RS16B and the ANSI Set for sizes RS35 to RS80. The new large size indicators are available to purchase as individual items, rather than as part of a set.
The Tsubaki Chain Wear Indicator enables plant and machinery engineers to measure roller chain condition and determine critical wear in one simple operation. In use one end is shaped to fit snuggly over a roller and the tip of the other end indicates the degree of wear by highlighting the total elongation over a number of links. As such, they are a valuable tool for helping keep machinery in top condition and for minimising unexpected chain failures that could lead to costly production downtime.
All hard working roller chain will stretch over time, and equally it is inevitable that the sprockets with which it engages will wear. The stretch will cause a loss of tension, reducing the transmission efficiency. This wear is likely to cause loss of alignment accuracy for the overall drive system, leading to repercussions in positioning and locating duties, reduced efficiency and an increase in noise and vibration. If wear increases to a critical point the chain will begin riding and jumping on the sprockets which causes shock loads, which in turn will further accelerate wear.
These problems are avoided by regularly monitoring the chain for stretch and changing it before problems become manifest. Tsubaki’s chain wear indicator gauges are made to high quality specifications and are resistant to corrosion. Their robust construction ensures accurate measuring every time over a long working life.
Considering environmental challenges for chain performance
Modern Engineering maintenance planning is a marathon not a sprint, so MRO (maintenance, repair, overhaul) specialists are usually looking for long term reliability rather than a quick fix that may not last the distance. Application environment is a key factor in selecting an adequate long term solution, especially for a transmission component like a chain. Derek Mack, Sales Director for Tsubaki UK, considers the effect of various working environments on chains in application.
In our daily lives we know that if we buy a cheap product it is unlikely to last as long as one with a quality pedigree behind it. In the commercial and industrial world, we quantify this as total cost of ownership (TCO) – initial purchase cost, plus running and maintenance costs over the life of the product, plus replacement costs and production downtime.
Again, referring to our daily lives, we instinctively know that we can use a budget product in non-demanding duties, but when the going gets tough quality goods will be required. In industrial parlance we would refer to a harsh working environment, which for a chain could include dust, water, heat, cold, aggregates, shock impact loads and harsh chemicals. So, what challenges do different industries suffer?
Heavy industries typically have tough working environments: steel mills can be so hot that any metal component can be weakened; it is virtually impossible to keep dust and grit out of machinery in mines and quarries; marine and shoreside environments will always have salt corrosion potential. Meat storage facilities will be refrigerated so lubrication is often problematic.
Modern industries are not without difficulties either. Electronic production uses some harsh chemicals, as do paint shops and pickling (surface treatment) plants. Many manufacturing processes requires stop/start machine cycles, so shock loads are inevitable. Logistics and materials handling can be hard and physical.
From this we can see that virtually every working environment has its own set of challenges, so it is no surprise that Tsubaki produces a range of industrial chains each designed to address a particular environmental condition. Thus, MRO engineers can select a chain appropriate to working conditions, and this will reduce running and maintenance costs while also optimising life expectancy.
For example, Tsubaki’s Lambda lube-free chain has established itself as a firm favourite in many different industries and applications. Its sintered bushes are impregnated with lubricant which aid efficient running and long life yet cannot leak oil to contaminate products such as foodstuffs, clothing, paper items, coloured surfaces or packaging.
With so much chain deployed in wet, humid and chemically aggressive environments Tsubaki has developed Neptune which uses a special resin coating for superb corrosion and chemical resistance. Each part of a Neptune chain is individually surface treated (unlike chains that are surface treated after assembly) so that the whole chain is resistant and there are no inclusions where corrosion can start.
It is regularly used in applications where water is present, in mushroom farms where humidity is usually 90% or higher, fresh and frozen food plants, for outdoor materials handling and other similar applications.
Heavy duty chain is a must in physically demanding applications such as mining, rig drilling, bulk handling, steel manufacturing, agriculture, wastewater treatment and marine environments. Tsubaki has a long history of developing and constantly improving chain to meet the demands of each market.
Tsubaki has long understood that if you match a chain to its environment you will optimise long term performance and minimise life time costs. The consequent increases in productivity can be quantified as a monetary saving over time for any given application and is usually manna to any boss’s ear.
Very often, the greatest challenge is convincing the budget holders to invest in specialist chain, but once the benefits are appreciated and the performance proven, the arguments for more ‘cost-effective’ alternative soon evaporate.
In short, MRO engineers can make a significant contribution to their company’s productivity and profitability by picking the best chain for each application.
Established in 1917, Tsubakimoto Chain Company is the world’s premier manufacturer of power transmission products with strong market positions in premium quality industrial drive & conveyor chains and associated power transmission components such as cam clutches, reducers & linear actuators. With a turnover exceeding $1,5 Billion US Dollars & 6,500 employees, the Tsubaki group includes 33 manufacturing locations and 77 group companies worldwide. Our production and sales networks are now more developed than ever.
Tsubakimoto Europe B.V. serves Power Transmission customers in the Pan-European market, Africa and the Middle East from European headquarters located in Dordrecht, the Netherlands, along with a local subsidiary based in Nottingham, serving the UK market & Ireland and from the office in Unterföhring, Germany customers in Germany, Austria and Switzerland are served. Customers in Spain and Portugal are served by our office in Madrid, Spain.
The image(s) distributed with this press release may only be used to accompany this copy, and are subject to copyright. Please contact DMA Europa if you wish to license the image for further use.
Gear drives9 ay ago
Klingelnberg at control 2018: Tactile and optical measurement on one machine
Industrial Hardware and Machine Parts11 ay ago
Rexnord adds to its Autogard Torque Limiters with the XG Series
Motors1 sene ago
Get a first-class ticket to productivity
Industrial Hardware and Machine Parts11 ay ago
ABB and Formula E partner to write the future of e-mobility
Industrial Hardware and Machine Parts2 sene ago
The necessity of bolted flange connection training
Motors2 sene ago
New generation of hollow shaft motors
Motors2 sene ago
ZF Technology on the Winners’ Podium of the Dakar Rally 2017
Industrial Hardware and Machine Parts2 sene ago
Custom hobbing tool enables 45-degree angles