Connect with us

Reducer

I-MAK is proud to announce its new membership to the AGMA!

Published

on

Founded in 1916, the American Gear Manufacturer Association is an association of companies, academicians and consultants involved in the design, manufacture and application of gears, couplings and related power transmission components and equipment. AGMA member companies currently number more than 495 selected members. They include gear manufacturers from the United States, Mexico, and Canada, as well as gearing interests from more than 30 countries around the world. I-MAK is proud to represent Turkey in this prestigious organization, our membership is showing the high dynamic of the Turkish Gear Industry. With several actors and a dedicated place in MIB organization (Association of Turkish Machine Manufacturers) the Turkish industry reached a high level of competitiveness and recognition around the world.

“With this new achievement I-MAK international network is now covering a large part of the globe with branches, sales offices, agents and distributors in North America, South America, Europe, Africa, Middle east and Asia.”

AGMA is accredited by the American National Standards Institute to write all U.S. standards on gearing. AGMA is also the Secretariat (Chairman) for Technical Committee 60 of the International Organization for Standardization (ISO). TC 60 is the committee responsible for developing all international gearing standards. In addition to the holding the position of Secretariat, AGMA convenes (chairs) the active ISO Working Groups related to gear inspection and testing.

By joining the AGMA, I-MAK is reinforcing their position in North America, and get ready for new technical development, innovation and challenge in the USA. I-MAK Strategy for the USA reached a new level in 2018 with the official opening of SIPCO-IMAK, a new brand dedicated to the North American market. With a central location in Houston, Texas, SIPCO-IMAK is composed of an experienced team of sales engineers. With a successful participation to the manufacturing expo in Los Angeles, California, in February 2019. SIPCO-IMAK is now expending its activities to several states and sectors.

Based on a strong stock in Houston, Texas, SIPCO-IMAK competitiveness will soon be reinforced with the opening of a brand new I-MAK mounting center in Texas. This new investment will contribute to the expansion of SIPCO-IMAK with faster delivery time and tailored made solution for US industrials and end users. On the technical side, I-MAK added new NEMA flange to their standards units and released new catalogues for the North American market, the new documentation is now featuring 50/60Hz frequency for motors and NEMA configurations.

With this new achievement I-MAK international network is now covering a large part of the globe with branches, sales offices, agents and distributors in North America, South America, Europe, Africa, Middle east and Asia.

International sales and marketing director, I-MAK. With his passionate and curious identity, Salim Haffar, is a professional, having an international background. French director aims to introduce Turkish quality and vision to the world.

Gearbox

Industrial type heavy duty gearboxes by Dişsan

Published

on

DA series helical and DK series bevel-helical gearboxes are suitable for heavy duty industrial applications. They are designed to transmit high output torques in optimized dimensions. They enable wide range of ratios with single to quadruple reduction options.

Thanks to their rigid structure, they are suitable to operate safely even in harshest conditions. Housing material is GGG40 cast iron. Gears are produced from high quality, case hardened steel. Heat treatment process is applied to obtain 58-60 HRC surface hardness. The gears are precision ground to ensure a quiet and low vibration operation. 

The gearboxes are available with hollow shaft or solid shaft. According to operating conditions, they are offered with optional accessories such as cooling systems, forced lubrication systems or oil expansion tanks. Back-stops, shrink discs and IEC B5 motor flanges are also available as optional accessorries. Special oil seal options are applied for dusty operation conditions.

Dişsan also offers complete solutions with motor, input coupling, gearbox and output coupling set on a steel base frame. 

For extruder applications, special extruder type right or left output options are available.

Input Options: 

  • Motor adapter for standard IEC B5 motors
  • Solid input shaft, without motor (right input, left input or double input shafts)

Output Options: 

  • Hollow output shaft
  • Solid output shaft (single or double)
  • Output flange

Applications:

Conveyors, Elevators, Mills, Cranes, Washing Units, Mixing Units, Extruders

Industries:

Mining, Construction, Metal Processing, Cement, Concrete Plants, Sand and Gravel Plants, Ceramics and Glass, Plastics

Industrial Gear Unit Types

DA – Helical Gear Units

DK – Bevel – Helical Gear Units

DAE – Extruder Gearboxes

Gearboxes with Auxiliary Drive

Continue Reading

Gearbox

Optimal solutions for the crane and hoist industries

Published

on

Active actor of the gearbox market for more than 47 years, I-MAK gearbox continue to propose new and innovative solution to their customers and partners. With more than 1.000.000 product references I-MAK is serving various industries around the world. 

Designed for the hoist and crane industries, the IRC Series have a lifting capacity ranging from 0,5 tons to 50 tons by using various fall combinations. Being based on ISO, DIN and FEM Standards all the calculations and configurations of the IRC Series are matching top class standards to guarantee a maximum of security within a smooth and efficient operation. Available in 5 different size of housings the IRC Series are composed of GG25 for the housing material and 16MnCr5 for the full range of gear. These different parameters allow I-MAK products to provide high quality, high strength, low wear, and silent operation.

Reaching up to 50 tons of lifting capacity the IRC series are taking a key place in the crane and hoist industry around the world with a compact design, easy mounting, and easy maintenance characteristics.

Working in outside or complex environments, under the aggressions of dust, heat, chemicals and water, our gearboxes are protected with a specific C Class painting, dust proof seals and IP 65 to prevent corrosion and any external aggression, which gives our geared motors solutions and increase lifetime and lowering the maintenance costs for the end users. 

IRC gearboxes can be coupled with a large range of input options keeping a smooth operation and long lifetime. The specific design of the IRC Series with long bearing distance and tapered roller are increasing the radial loads capacity matching the requirements of ISO/FEM classifications.

Solutions for the crane and hoist industries of I-MAK are not limited to the IRC Series, as the brand is also providing various other solutions for multiple applications. Parallel geared motors (YP series), helical geared motors (IR Series) and bevel geared motors (IRK Series) are coupled with frequency inverter to provide high precision in translation movement. 

Last year, I-MAK added a new solution for heavy hoist and crane. With 7 new sizes of housing the new M Series is key addition to the existing range of products. Designed with a monobloc housing and various gears configurations, this new line can reach up to 35.500 Nm of output torque in standard configuration, allowing crane producers to reach a lifting capacity of 50 tons. 

The IRC Series and I-MAK solutions are already active in more than 40 countries, serving various industries and multiple applications. Installed in giant phosphates mines of Morocco, the gearboxes are resisting to dust and sun in remoted areas. They are also lifting tons of material in giant steel and foundry plants all over India. Specific and complex configurations are also running all over the US serving various industries. 

In these complicate days and complex actuality, I-MAK continue to keep its core principles and missions. Serving and assisting various industries around the world, with quick and effective answers via a wide network of sales offices, service centres and online engineering support. The brand is also looking into the future with a strong R&D team and partnership with various producers and technological centres around the world. More than ever I-MAK remain an integrated player in the international market of gearboxes and power transmission.

Continue Reading

Reducer

DM Series helical gear reducers from Dişsan

Published

on

DM series, monoblock helical gearmotors are available with foot or flange mounted designs.  Upon request, they can be manufactured with motor adapters for standard IEC motors with B5 flanges. The standard motors are in compliance with IEC standarts with IE2 or IE3 efficiency class. DM series gearboxes are produced in nine different sizes and offer easy mounting and flexible connection options.

Thanks to their rigid structure, they are suitable to operate safely even in harshest conditions. Housing material is GG20 or GGG40 cast iron. Gears are produced from high quality, case hardened steel. Heat treatment process is applied to obtain 58-60 HRC surface hardness. The gears are precision ground to ensure a quiet and low vibration operation. 

Input Options: 

  • Direct motor connection
  • Motor adapter for standard IEC B5 motors
  • Solid input shaft, without motor

Output Options: 

  • Solid output shaft
  • Agitator flange

Applications: Conveyors, Spiral Conveyors, Elevators, Cranes, Concrete Mixers, Washing Units, Concrete Recycling Systems, Mixing Units, Agitators, Aerators.

Industries: Mining, Construction, Metal Processing, Cement, Concrete Plants, Sand and Gravel Plants, Chemical and Pharmaceutical Plants, Ceramics and Glass, Water and Wastewater Treatment.

DM Series Gearbox Types:

DMA – Foot mounted, with motor

DMF – Flange mounted, with motor

DNA – Foot mounted, with IEC B5 Motor adapter, without motor

DMFK – Flange mounted, with motor, with agitator flange

DTA – Foot mounted, with input shaft, without motor

DTFK3 – Flange mounted, with input shaft, with agitator flange, without motor

Continue Reading
Advertisement
Advertisement

Trending

Copyright © 2011-2018 Moneta Tanıtım Organizasyon Reklamcılık Yayıncılık Tic. Ltd. Şti. - Canan Business Küçükbakkalköy Mah. Kocasinan Cad. Selvili Sokak No:4 Kat:12 Daire:78 Ataşehir İstanbul - T:0850 885 05 01 - info@monetatanitim.com